Create account / Log in

Reveal function does not reveal card anymore !

Topics related to the main Vassal engine.

Moderators: Tim M, uckelman

Reveal function does not reveal card anymore !

Postby Brent Easton » July 9th, 2009, 12:25 pm

Grégory,

I can't help you without a specific log file for one of the modules you mention displaying this problem. I do not have the time hunting around for a problem that may or may not be there. It sounds like you have not set your cards up correctly.

Regards,
B.

On 9/07/2009 at 5:14 AM soft-bug wrote:

Hi,

After several tests on modules with cards game (Dungeoneer, Faiseurs
d'Univers, Battlefields of Olympus...) .. i have noticed that the Reveal
function does not reveal cards !!!

Now when you use a reveal function (Mask Trait) the card act like a peek
command mode :

1) Reveal = the image of the card is shown till selected
2) When the revealed card is no longer selected = the back is shown
instead of the image
3) to see the image you must clic on it

Now Reveal acts like PEEK command !!!

I done !




_______________________________________________
Messages mailing list
Messages@forums.vassalengine.org
http://forums.vassalengine.org/mailman/ ... engine.org

Post generated using Mail2Forum (http://www.mail2forum.com)
User avatar
Brent Easton
 
Posts: 2880
Joined: December 21st, 2007, 3:06 am
Location: Berry, NSW, Australia

Postby soft-bug » July 9th, 2009, 1:04 pm

Hi Brent,

I have sent you an email.

The problem is located to the Display style option of the Mask trait.

Display style: Determines how a masked piece is seen by the owning player.

Now with the new 3.1.8 options of Display style (all or only several options) are considered still actived, even if the piece is no longer masked.

Regards,

Grégory
founder of The http://www.VassalFactory.org
User avatar
soft-bug
 
Posts: 222
Joined: December 20th, 2007, 9:30 am
Location: Paris / France

Reveal function does not reveal card anymore !

Postby Brent Easton » July 9th, 2009, 1:18 pm

Damn. It's a side-effect of the bug fix I did for the Peeking issue.

I'll look into it in the morning.

B.

*********** REPLY SEPARATOR ***********

On 9/07/2009 at 6:04 AM soft-bug wrote:

Hi Brent,

I have sent you an email.

The problem is located to the Display style option of the Mask trait.

Display style: Determines how a masked piece is seen by the owning player.

Now with the new 3.1.8 options of Display style (all or only several
options) are considered still actived, even if the piece is no longer
masked.

Regards,

Grégory




_______________________________________________
Messages mailing list
Messages@forums.vassalengine.org
http://forums.vassalengine.org/mailman/ ... engine.org

Post generated using Mail2Forum (http://www.mail2forum.com)
User avatar
Brent Easton
 
Posts: 2880
Joined: December 21st, 2007, 3:06 am
Location: Berry, NSW, Australia

Reveal function does not reveal card anymore !

Postby uckelman » July 10th, 2009, 10:38 am

Thus spake "soft-bug":
Hi Brent,

I have sent you an email.

The problem is located to the Display style option of the Mask trait.

Display style: Determines how a masked piece is seen by the owning player.

Now with the new 3.1.8 options of Display style (all or only several options)
are considered still actived, even if the piece is no longer masked.

Regards,

Grégory


Try 3.1.9-svn5837:

http://www.nomic.net/~uckelman/tmp/vassal/

--
J.


_______________________________________________
Messages mailing list
Messages@forums.vassalengine.org
http://forums.vassalengine.org/mailman/ ... engine.org

Post generated using Mail2Forum (http://www.mail2forum.com)
User avatar
uckelman
Site Admin
 
Posts: 8380
Joined: December 10th, 2007, 9:48 am
Location: Durham, England


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 3 guests