Page 1 of 1

Problem with Twilight Struggle in v 3.2.2

PostPosted: December 15th, 2012, 9:42 pm
by derekrledr
Not sure whether this should be in Module Support or here... but the problem only arose when I updated to VASSAL 3.2.2. I am using the Twilight-Struggle-Deluxe-3.0.10a module. There is a Card window that contains a button that automatically distributes the initial hands of cards. This button did not do anything in VASSAL 3.2.2. I reinstalled 3.1.19 (I forgot there had been a 3.1.20) and the intial card distribution worked fine.

I'm a little surprised that I seem to be the first to report this... something special with my Windows 7 Professional?

Derek

Re: Problem with Twilight Struggle in v 3.2.2

PostPosted: December 15th, 2012, 10:12 pm
by uckelman
Thus spake derekrledr:
> Not sure whether this should be in Module Support or here... but the
> problem only arose when I updated to VASSAL 3.2.2. I am using the
> Twilight-Struggle-Deluxe-3.0.10a module. There is a Card window that
> contains a button that automatically distributes the initial hands of
> cards. This button did not do anything in VASSAL 3.2.2. I reinstalled
> 3.1.19 (I forgot there had been a 3.1.20) and the intial card
> distribution worked fine.
>
> I'm a little surprised that I seem to be the first to report this...
> something special with my Windows 7 Professional?

The TS module has not yet been updated to work with 3.2.

--
J.

Re: Problem with Twilight Struggle in v 3.2.2

PostPosted: December 24th, 2012, 1:23 am
by flashydavid
I''m having the same problem - Windows 7 64bit.

None of the previous modules are working either.

Have removed all previous versions of vassal and reinstalled and still get the same problem

Re: Problem with Twilight Struggle in v 3.2.2

PostPosted: January 13th, 2013, 7:50 pm
by EdPrem
I was having the same problem with my MacAir. So it is not OS specific...

Is this fixed yet?

Re: Problem with Twilight Struggle in v 3.2.2

PostPosted: January 13th, 2013, 9:29 pm
by mkiefte
You're going to have to use the older version of VASSAL to use the Twilight Struggle module until it is updated. It has nothing to do with your OS.

- M.

On 2013-01-13, at 3:50 PM, EdPrem wrote:

> I was having the same problem with my MacAir. So it is not OS
> specific...
>
> Is this fixed yet?
>
> _______________________________________________
> Read this topic online here:
> viewtopic.php?p=38023#p38023
> _______________________________________________
> messages mailing list
> messages@vassalengine.org
> http://www.vassalengine.org/mailman/listinfo/messages
>

Re: Problem with Twilight Struggle in v 3.2.2

PostPosted: February 12th, 2013, 6:14 am
by Kihon
Hi
Just noticed this myself.
Tried manually dealing card and also noticed card 27 is blank.
Which version of vassal should be used?
Is 3.2.2 worth having, seems to have problems with many modules and seems to load slower!

Cheers

Re: Problem with Twilight Struggle in v 3.2.2

PostPosted: February 12th, 2013, 1:40 pm
by mkiefte
The Twilight Struggle module uses a lot of custom classes. You should use
the latest 3.1 version of VASSAL.

That being said, there's nothing particularly special about any of the
cards....

- m.

On 12 February 2013 02:14, Kihon wrote:

> Hi
> Just noticed this myself.
> Tried manually dealing card and also noticed card 27 is blank.
> Which version of vassal should be used?
> Is 3.2.2 worth having, seems to have problems with many modules and
> seems to load slower!
>
> Cheers
>
>
> ______________________________**_________________
> Read this topic online here:
> http://www.vassalengine.org/**forum/vie ... 8#**p38608
>
> ______________________________**_________________
> messages mailing list
> messages@vassalengine.org
> http://www.vassalengine.org/**mailman/listinfo/messages
>
>