Create account / Log in

Glueing one piece to another

Talk about module design ideas and techniques.

Moderators: uckelman, Tim M

Glueing one piece to another

Postby Khalsala » January 2nd, 2021, 5:16 pm

Hey guys. Is there any easy way to "glue" one piece to another like a counter to card? So that it will stay at the piece while its in deck? So that if you play the card it will come out with glued counter? (the counter comes from different deck than the card in this way)
Khalsala
 
Posts: 5
Joined: December 17th, 2020, 5:24 pm

Re: Glueing one piece to another

Postby jrwatts » January 2nd, 2021, 9:26 pm

Not really. You could possibly simulate this by having the card contain all the necessary traits for the counter, as well, and then when the counter is placed on the card, you delete the counter and copy its traits into the card, instead. Then, when you need to separate the counter again, use the "Place Marker" trait to create a new one. Obnoxious to set up, but it should work.
jrwatts
 
Posts: 222
Joined: April 29th, 2020, 10:30 pm

Re: Glueing one piece to another

Postby Khalsala » January 6th, 2021, 9:53 am

I thought so. Thank you very much.
Khalsala
 
Posts: 5
Joined: December 17th, 2020, 5:24 pm

Re: Glueing one piece to another

Postby barbanera » January 6th, 2021, 11:46 am

Use layers.
barbanera
 
Posts: 467
Joined: January 12th, 2012, 2:27 pm


Return to Module Design

Who is online

Users browsing this forum: No registered users and 5 guests