Create account / Log in

Mouse Over Stack Viewer Glitch?

Talk about module design ideas and techniques.

Moderators: uckelman, Tim M

Mouse Over Stack Viewer Glitch?

Postby Kard » November 17th, 2015, 12:55 pm

In the module I have it programmed that cards are automatically sent by Global Key Commands from one deck to empty deck piles (that will automatically refresh if they are emptied). After the automatic send (upon a turn counter moving forward), the deck piles mouse over zoom fails to function properly (but will work beforehand, or if the card is manually moved, or even clicked and dragged for a moment without going anywhere). All the settings in the deck options are correct to allow the zoom to work.

Is there something else I can check that could be causing this to fail?
Kard
 
Posts: 33
Joined: October 30th, 2009, 5:01 am

Re: Mouse Over Stack Viewer Glitch?

Postby shilinski » March 3rd, 2018, 8:46 pm

It's 3 years later, and I have the same problem, which I believe is a Vassal bug.

I have a face-down card deck and a face-up discard pile. I want the mouse-over viewer to work with the top card of the discard pile.

It works as expected if I drag a card from anywhere (deck, table) to the discard pile.
It works as expected if I right-click a card on the table, sending it to the discard pile.
It does NOT work if I use any sort of global key command that moves the top card from the face-down deck directly to the discard pile. I tried everything to fool it, but it refuses to zoom the top card of the discard pile unless I pull off the top card and then put it back.
shilinski
 
Posts: 223
Joined: December 22nd, 2007, 8:46 am
Location: Laurel, Maryland

Re: Mouse Over Stack Viewer Glitch?

Postby uckelman » December 7th, 2020, 9:56 pm

Does this still occur with 3.4.11, or whatever the current version is when you read this?
User avatar
uckelman
Site Admin
 
Posts: 9227
Joined: December 10th, 2007, 9:48 am
Location: Durham, England

Re: Mouse Over Stack Viewer Glitch?

Postby shilinski » December 9th, 2020, 3:04 am

It's fixed with 3.4.11.
shilinski
 
Posts: 223
Joined: December 22nd, 2007, 8:46 am
Location: Laurel, Maryland


Return to Module Design

Who is online

Users browsing this forum: No registered users and 4 guests